With the weather as good as it was, I decided to get in one last ride this year. Nothing fancy just 40+ km on tarmac.

It was a good ride and I kept grinning riding along a road between the villages of Franzenheim and Kernscheid — at least on the inside because on the outside my expression was a bit pained from going uphill. I discovered this piece of asphalt a few weeks after my trip to Scotland in 2018 and it reminded me so much of the singletrack roads over there (the only thing missing are the passing places).

I was really lucky because while temperatures for most of the ride were below 0°C, it was dry and I only encountered a few spots of frozen ground.

And I have to say: I might not enjoy road cycling a lot but one distinct advantage to gravel cycling is not having to clean my bike after the ride.

We met up with a friend and her dog on a hilltop fairly close to our place for a morning walk. The weather promised some nice photo opportunities, so I took my X-T3 and the 35/2 lens with me. Not only was it a nice walk with great company, the pictures I got out of it didn’t disappoint, either.

I couldn’t decide between using the Astia, ProNeg High, and Classic Chrome film simulations in a lot of places, so the pictures above are a mix of them.

We visited family over the weekend in a rather unplanned manner. On Saturday the weather was better than expected and we immediately used this opportunity to fuel up on some sun.
The northern part of the Kottenforst forest has suffered in the storms over the past few years and a lot of trees had to be cut down so it’s not the prettiest area to take a walk in right now but the seasons’s characterstics and low standing sun made for beautiful views.
I still find it hard to edit high-contrast scenes forest scenery like this to properly capture what I saw and the mood of the moment but these two came out pretty well.

Our two dogs (only Mika pictured here) had a lot of fun and their noses got a good workout because there’s still many wild animals in that area. Mika cracks me up every time because unless you capture her in action, she always looks like she’s posing.

(For those interested, all photos were shot with the Fujifilm X-Pro2 with the XF35mmF2 R WR lens and edited in Lightroom mobile with the Velvia film simulation. Side note about the last part: I find that LR’s version of Velvia has a slightly too strong magenta tinge so I typically remove 5–15 points in the white balance settings.)

On Wednesday, in an attempt to make good use of the surprisingly sunny weather, I took my gravel bike out for a first ride with the WTB Nano 40.

My recent experiment of using 650b × 47 mm tyres on my bike failed due to tyre rub on the left chain stay, yes, but it gave me a taste of what wider, higher-volume tyres with an aggressive tread could do for riding gravel and some tame singletrack. So after doing some research on 700×40c rubber, I had high hopes for the WTB NANO 40.

(I set up the tyres tubeless with Muc-Off’s No Puncture Hassle Tubeless Sealant and inflated them to 37 psi up front and 38 psi in the back referencing the handy tubeless tire pressure recommendations published by ENVE.)

For this outing I put together a 20 km route that I had ridden before, at least in parts, comprised of fire roads, some root-y singletrack, a few fast descents on what I thought was going to be either fire roads or well-worn foot paths. The bad news is that some of the paths had been shut down years ago and were very much overgrown and hard to navigate, the good news is that I was not only able to try the NANO 40 on loose, muddy, sloshy, puddle-dotted forest roads, I was also treated to a crazy fast descent on a 3 km hard pack and relatively dry gravel road.

After finishing the ride, I was left with two dominant feelings from this first experience with the NANO 40:

1. What an insanely fun ride. These tyres did such a good job and provided loads of grip even in ankle-deep mud.
2. You idiot. You had considered buying these almost two years ago when you replaced the Schwalbe X-One 33 mm tyres on the Canyon Inflite AL that brought you to gravel cycling in the first place but you didn’t do it because you were too chicken about trying a tubeless setup and the tread looked too aggressive.

So what did I learn?

For one that tubeless setups are the way to go for me moving forward, it seems.
Don’t get me wrong, the Donnelly X’Plor MSO 700×40c 120 TPI tube tyres I’ve ridden so far are crazy good. Having now ridden a properly supple and comparatively aggressively treaded tyre, I appreciate them even more. For a tubed tyre, they are very comfortable and robust even when ridden below the manufacturers specification of ~ 50 psi and they offer great traction within their limits.

Then there’s the realisation that once the fear of pinch flats is reduced and I embrace lower pressures, it opens up a lot more paths to ride. That said, I am going to increase the pressure in the back wheel for the next ride to 40 psi, because at 38 psi, it sometimes squirmed too much beneath me especially on faster, slightly rockier roads.

Lastly that I felt the NANO 40 provides a very good mix of a fast rolling 700c tyre and some serious grip on loose ground that the WTB Sendero 47 got me hooked on.

Oh and they look oh so nice on my bike 😏

A couple of weeks ago I had the idea to buy a second wheel set for Battle Cat, my gravel bike, to expand the where I can ride it. The plan was to keep the 700c wheel set I’ve been riding for the past two years for longer gravel rides or for road riding (using road tyres, obviously). I would then buy a 650b/27.5” wheel set and a pair of wider tyres with more bite to venture into more gnarly terrain.

I inquired with the frame manufacturer what tyre width would be safe to use in the frame and set out to find a good, used wheel set from DT Swiss because I’ve had nothing but great experiences with these so far. After being told that 1.9“ or 4.83 cm wide tyres should work and still provide enough clearance, I quickly settled on the WTB Sendero 650b × 47 mm pneus.

The result was this sexy setup:

The wheel set I found was an older pair DT Swiss M1700 MTB wheels with a decent internal rim width and the Ratchet Free Hub System. There was a bit of a setback when I found out that the last person to service the hind wheel didn’t just fail to remove a massive radial run-out, they also centred the rim over the hub body and not over the axle, resulting in a rim that was too far on the left. After getting this fixed for a good amount of money, putting the tyres on tubeless and the wheels into the frame, I saw that it was a tight fit but doable with no tyre rub on the frame or fork.

Well, that changed after the first 15 km of singletrack riding on Saturday. I pushed the tyres the way you would and to my great dismay, they expanded/deformed in a way that caused tyre rub on the left chain stay twice in one revolution on a perfectly true back wheel.

What I’m left with is the choice to either sell the wheel set and tyres again or to find slightly smaller but equally gnarly tyres for the wheels. The problem here, of course, is that smaller tyres also mean an even smaller wheel diameter and a further lowering of the bottom bracket, something that already took getting used to going from 700×40c to 584×47c on the Litespeed T5 Gravel frame I’m riding.

There’s one silver lining to all of this, albeit a fact that left me with a very substantial urge to slam my head into my desk repeatedly because I could’ve saved myself the trouble of buying another wheel set:
I started checking out which 700×40c rubber is available that would give me better grip on wet forest floor than the Donnelly X’Plor MSO I love so much. I found a number of options, the WTB Nano 40 being the supposed best among them when set up tubeless. The only issue is that WTB recommends running these tyres on a rim with at least 20 mm internal width and my [DT Swiss CR1600 Spline db](DT Swiss - CR 1600 SPLINE® 23) wheels are 22 mm wide externally … … … or so I thought.
Turns Out ™ I had misread the specs of the wheels because the spec sheet of the bike I bought them on didn’t specify whether the 22 mm were internal or external width figures. Long story short, they have an internal width of 22 mm, meaning they are right in the goldilocks zone width not just for the WTB Nano 40 but for many other ~ 40 mm wide, supple gravel tyres.

I’m likely going to try and get my hands on the Nanos if I can find them for a decent price and maybe, just maybe I’ll get my wish of a gravel bike capable of some gnarlier paths but still fast when I need it to be.

Goodbye 650b wheels, I hardly knew ye.